WS Bar for Attic and Truss Overhangs
Finally, a certified anchorage device for painters and other trades working on the exterior of homes and multifamily buildings! Our WS-TrussBar is a SAS exclusive design specified for temporary use by installing inverted on the truss overhangs. The bar installs with a total of 10 ea. 2.0” WS Series Wood Screws (supplied with anchor). It can be adjusted for trusses centered 12”, 16” and 24” on center with a minimum 2×4 top chord material. The trusses must be fully sheathed with bird blocking in place and fascia board installed. Exterior wall sheathing is not required. Simply attach the anchor with the supplied screws, attach your vertical lifeline or SRL and go to work. Perfect for painting contractors, especially on homes that do not have any permanent fall protection installed. Minimum overhang at eave is 22”. Please consult the WS-TrussBar 3011 prior to use.
- 5,000lb min. tensile strength
- Lightweight aluminum 6.5lb
- Installs on 2×4 and larger trusses
- Easily adjustable for standard top chord spacing
- Supplied with re-useable WS wood screws
- Single person tie off with lifelines or SRL’s
- Use with HLL systems no. 1335 and 1336 for a maximum spacing of 20ft.
- Can be used as a permanent tie-off point for attic access as required by confined space standards
- Rated for OSHA Fall Arrest
- English/Spanish instruction manuals
Part #: 2835
Description: WS TrussBar™ – Single Anchor with Screws
UPC: 786158283501
30° Wire Rope Angle Options
Part #: 1335-10
Description 10′ 30° cable with snaphooks & O-Rings
UPC: 786158133509
Part #: 1335-12
Description 12′ 30° cable with snaphooks & O-Rings
UPC: 786158133516
Part #: 1335-14
Description 14′ 30° cable with snaphooks & O-Rings
UPC: 786158133523
Part #: 1335-16
Description 16′ 30° cable with snaphooks & O-Rings
UPC: 786158133530
Part #: 1335-18
Description 18′ 30° cable with snaphooks & O-Rings
UPC: 786157133547
Part #: 1335-20
Description 20′ 30° cable with snaphooks & O-Rings
UPC: 786158133554
5° Wire Rope Angle Options
Part #: 1336-10
Description 10′ 5° cable with snaphooks & O-Rings. Requires the use of 1065-AC energy absorber and carabiner.
UPC: 786158133608
Part #: 1336-12
Description 12′ 5° cable with snaphooks & O-Rings. Requires the use of 1065-AC energy absorber and carabiner.
UPC: 786158133615
Part #: 1336-14
Description 14′ 5° cable with snaphooks & O-Rings. Requires the use of 1065-AC energy absorber and carabiner.
UPC: 786158133622
Part #: 1336-16
Description 16′ 5° cable with snaphooks & O-Rings. Requires the use of 1065-AC energy absorber and carabiner.
UPC: 786158133639
Part #: 1336-18
Description 18′ 5° cable with snaphooks & O-Rings. Requires the use of 1065-AC energy absorber and carabiner.
UPC: 786158133646
Part #: 1336-20
Description 20′ 5° cable with snaphooks & O-Rings. Requires the use of 1065-AC energy absorber and carabiner.
UPC: 786158133653
Part #: 1065-AC
Description: Coil Energy Absorber – 304sst option only
UPC: 786158106510
Part #: 5001-Z
Description: Steel Twist Lock Carabiner
UPC: 786158500196
Replacement Fasteners
Part #: 2084-2.0
Description: 2″ WS Series Screw, Box of 25 retail packed
UPC: 786158208429
Part #: 2084-2.5
Description: 2-1/2″ WS Series Screw, Box of 25 retail packed
UPC: 786158208436
Part #: 2084-3.0
Description: 3″ WS Series Screw, Box of 25 retail packed
UPC: 786158208443
Part #: 2084-3.5
Description: 3-1/2″ WS Series Screw, Box of 10 retail packed
UPC: 786158208450
