CRA Rigging Hardware – Coil Energy Absorber

SAS’s rugged Coil Energy Absorber is designed for an in-line Horizontal Lifeline attachment. Made from 304 stainless steel to withstand the elements, including salt air or chemical exposure. This Coil Energy Absorber is another option in both the Galvanized and Stainless Steel HLL kits. Designed specifically for use with SAS commercial anchors, these components can be used with other mfg. equipment when engineered by a qualified person.

We also offer numerous parts to achieve a HLL system that works for your products including:

Rigging Kits: our standard turnbuckle/clamps/thimbles/sliders/energy absorber for lifeline lengths up to 120’. They include everything you need for a complete installation except for the cable. Available in galvanized or stainless-steel finishes. See part numbers 1050-G and 1051-S.
Energy Absorber: a specialized in-line energy absorber
Turnbuckles: used in the horizontal lifeline system to adjust wire rope length and tension. Available in galvanized or stainless-steel finishes. Use 1 turnbuckle in systems up to 60’ and 2 turnbuckles in systems 60’ – 120’.
Cable: galvanized or stainless-steel 3/8” cable rated for 14,000 pounds. Use in runs up to 120’ and in conjunction with the rigging kits.
Cable Clamps: used to terminate the end of the cable lifelines and available in galvanized and stainless-steel finishes.
Cable Thimble: used to terminate the end of our cable systems and are required on both ends of the HLL. Available in galvanized or stainless-steel finishes.
SAS Coupler Adapter: used to link turnbuckles, energy absorbers and CRA together
Connector “O” Rings: permanently attached to the HLL and used to connect your personal protective equipment to slide through pass-thru top CRA’s.
Pass-Thru Converter: a device that converts Pass-Thru Top CRA’s into a Loop Top to connect your PPE to for a fall arrest rating
Label Packages: comprehensive warning, instruction and inspection label packages for all rigging equipment and hardware

Please refer to all applicable Instruction/Specification Manuals for further detailed information on rigging, attachment and use.

Part #: 1065-AC
Description: Coil Energy Absorber – 304sst option only
Finish: 304sst
UPC: 786158106510

CRA HLL Rigging Components

Part #: 1065-AS
Description: Spring Energy Absorber – 304 Stainless Steel
Finish: 304sst
UPC: 786158106527

Part #: 1055
Description: 3/8″ Galvanized Cable sold per ft. Cut to Length
Finish: HDG
UPC: 786158105506

Part #: 1055-S
Description: 3/8″ Stainless Steel Cable sold per ft. Cut to Length
Finish: 304sst
UPC: 786158105575

Part #: 1052-G
Description: Factory Supplied HLL Swage – Galvanized. Includes: 1ea eye thimble, 2 Aluminum Swages & TPE cover
Finish: HDG
UPC: 786158105216

Part #: 1052-S
Description: Factory Supplied HLL Swage – Stainless Steel. Includes: 1ea eye thimble, 2 Aluminum Swages & TPE cover
Finish: 304sst
UPC: 786158105223

Part #: 5010-SM
Description: HLL Connector O-Ring (4ea required for the complete HLL kit, #1051-S)
Finish: Zinc
UPC: 786158501018

Part #: 1058
Description: 3/4″ x 12″ Turnbuckle – Galvanized w/2ea 5/8″ x 3″ 18-8 SST Bolts and Lock Nuts (2ea required for the complete HLL kit, #1050-G)
Finish: HDG
UPC: 786158105803

Part #: 1058-S
Description: 3/4″ x 6″ Turnbuckle – Stainless Steel w/2ea 5/8″ x 3″ 18-8 SST Bolts and Lock Nuts (2ea required for the complete HLL kit, #1051-S)
Finish: 304sst
UPC: 786158105810

Part #: 1081-S
Description: Loop Top Coupler – 304sst option only. Comes w/1ea 5/8″ x 2.0″ & 1ea 5/8″ x 2-1/4″ Bolts and Lock Nuts. Compatible w/#1090 Loop Tops or 4-Way Top Fixtures
Finish: 304sst
UPC: 786158108101

Part #: 1087-SA
Description: HLL Absorber Coupler – 304sst option only. Comes w/2ea 3/8″ x 1″ & 1ea 5/8″ x 2″ Bolts and Lock Nuts (2ea required for the complete HLL kit, #1051-S)
Finish: 304sst
UPC: 786158108712

Part #: 1057
Description: 3/8″ Galvanized Rope Eye Thimble (2ea required for the complete HLL kit, #1050-G)
Finish: HDG
UPC: 786158105704

Part #: 1057-ST
Description: 3/8″ Stainless Steel Rope Eye Thimble (2ea required for the complete HLL kit, #1051-S)
Finish: 304sst
UPC: 786158105711

Part #: 1056
Description: 3/8″Cable Clamp (6ea required for the complete HLL kit, #1050-G)
Finish: HDG
UPC: 786158105605

Part #: 1056-S
Description: 3/8″ Stainless Steel Cable Clamps (6ea required for the complete HLL kit, #1051-S)
Finish: 304sst
UPC: 786158105629