CRA Weld-On Riser

This Pre-Engineered permanent flat/low-slope roof anchor is specified for use as a single user fall protection anchor point, a window-washing suspension/tie-back anchor point, as a horizontal lifeline intermediate anchor or as an intermediate anchor with pass-thru top. The anchors are designed for installation in the field by welding the riser to structure. Backed by full 3rd party engineering. CRA Weld-On Overview (see the Instruction/Specification Manual for details):

  • DECKING ATTACHMENTS: Structural Steel
  • ATTACHMENT HARDWARE: Field Welds
  • ROOFING MATERIAL: Built-Up Roofing, Spray-On Roofing, Modified Bitumen Roofing, Green Roofs, PVC, EPDM, TPO, Asphalt Shingle Roofing, Corrugated and Standing Seam Metal Roofs
  • FLASHING: provided by the roofing contractor or built on site and flashed as per standard procedures for a 3” or 4.5” OD pipe. A factory supplied 35-year EPDM flashing for metal roof applications is available.
  • FALL PROTECTION CONFIGURATIONS:
    • Stand Alone Anchor/Tie-Back Anchors for Fall Protection
    • Roof Perimeter Cable Pass-Through systems
    • Roof Centerline Cable Pass-Through systems
    • Roof Perimeter Based Window Washing Tie-Back Anchors
    • Roof Centerline Based Window Washing Tie-Back Anchors

Each CRA anchor comes with a 4-page, comprehensive Instruction/Specification Manual to cover most installation options. See the Engineering tab for comprehensive design/testing/engineering documents.

  • Certified for Fall Protection and Window Washing
  • ASTM 123 Hot Dip Galvanized Coating
  • 5,000-pound Minimum Strength
  • Stand Alone Anchors or Use in Horizontal Lifeline System up to 130’
  • Available in 304/316 Stainless Steel
  • Individual Serial Number Tag Riveted onto Riser
  • Large Inventory in Stock
  • Pre-Engineered Design for Easy Compliance

Window Washing Suspension: Roof and Wall Safety/Tie-Back Anchors for window washing suspension require special consideration. North America safety standards require a building to have certified anchorages capable of supporting the necessary loads before any worker suspends from the anchor. Our anchors can help you provide compliance with OSHA, ANSI and IWCA I-14.1 standards for window cleaning or any other job requiring suspension over the edge of the building.

Window Washing suspension requires 2 anchors for the worker to tie off to – one anchor supports the workers equipment and one anchor is used for the safety lifeline or fall arrest equipment. Our pre-engineered anchors give you the compliance that you need at an affordable cost. Our unique line of anchors can be mounted to roof decking, concrete curbs/beams/walls, steel beams as well as other structures capable of supporting the intended loads. The CRA’s for window washing are designed for a 5,000-pound ultimate load, a 2,500-pound test load and a 1,250-pound allowable load. Parapet walls must be capable of supporting the intended loads, too.

With over 25 years’ experience, super Anchor Safety is the industry leader for commercial Roof anchors and horizontal lifeline systems. Used primarily on low slope applications, anchors can be custom fabricated for attachment to any tope of structural support and to any architectural requirement. Our time-tested anchor designs are cost effective, east to install, low maintenance and feature state of the art pre-cast loop tops and pass through connector fixtures. We stock all the horizontal lifeline accessories needed for your project including IWCA window washing and Cal-OSHA compliant roof anchors. We can also supply 100% USA Manufactured/Certified anchors. Our simple design backed up with a full regimen of engineering documents are a cost effective, east to install, low maintenance permanent fall protection fixture.

ImagePart #Riser HeightRiser O.D.Riser Schl.WeightMaterialUse Rating

Download

1043-WR8″3.0″406.5Raw Steel1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1043-WG8″3.0″406.5HDG Steel1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1043-WS8″3.0″406.5304 SST1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1043-WSX8″3.0″406.5316 SST1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor

Download

1044-WR12″3.0″409.0Raw Steel1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1044-WG12″3.0″409.0HDG Steel1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1044-WS12″3.0″409.0304 SST1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1044-WSX12″3.0″409.0316 SST1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor

Download

1045-WR18″3.0″4013.0Raw Steel1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1045-WG18″3.0″4013.0HDG Steel1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1045-WS18″3.0″4013.0304 SST1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1045-WSX18″3.0″4013.0316 SST1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor

Download

1046-WR24″3.0″8021.0Raw Steel1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1046-WG24″3.0″8021.0HDG Steel1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1046-WS24″3.0″8021.0304 SST1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1046-WSX24″3.0″8021.0316 SST1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor

Download

1047-WR30″4.5″8026.0Raw Steel1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1047-WG30″4.5″8026.0HDG Steel1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1047-WS30″4.5″8026.0304 SST1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1047-WSX30″4.5″8026.0316 SST1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor

Download

1048-WR36″4.5″8031.0Raw Steel1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1048-WG36″4.5″8031.0HDG Steel1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1048-WS36″4.5″8031.0304 SST1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor
1048-WSX36″4.5″8031.0316 SST1 person PPE Anchor, HLL End & Intermediate Anchors, Window Washing Anchor

Download

1047-R30″3.0″8026.0Raw Steel1 person PPE Anchor, HLL End & Intermediate Anchors
1047-G30″3.0″8026.0HDG Steel1 person PPE Anchor, HLL End & Intermediate Anchors
1047-S30″3.0″8026.0304 SST1 person PPE Anchor, HLL End & Intermediate Anchors
1047-SX30″3.0″8026.0316 SST1 person PPE Anchor, HLL End & Intermediate Anchors

Download

1048-R36″3.0″8031.0Raw Steel1 person PPE Anchor, HLL End & Intermediate Anchors
1048-G36″3.0″8031.0HDG Steel1 person PPE Anchor, HLL End & Intermediate Anchors
1048-S36″3.0″8031.0304 SST1 person PPE Anchor, HLL End & Intermediate Anchors
1048-SX36″3.0″8031.0316 SST1 person PPE Anchor, HLL End & Intermediate Anchors
Anclajes verticales CRA soldados en sitio:

Anclas prefabricadas de uso permanente para techos planos o de baja pendiente, especificadas para ser usadas como punto de anclaje para protección contra caídas por un usuario, para el amarre en el lavado de ventanas por suspensión, como un ancla intermedia en sistemas horizontales de cuerdas salvavidas o como un ancla intermedia en con tapa pasante. Estas anclas han sido diseñadas para ser instaladas en sitio soldando el tubo a la estructura del edificio. Diseños totalmente respaldados por terceros. Vista general de las anclas CRA para soldar en sitio (para mas detalles consulte el manual de Instrucciones/Especificaciones):

  • Acoplamiento a cubiertas: Acero estructural
  • Accesorios Para Acoplamiento: Soldadura en sitio
  • Material del Techo: Techo de membrana y brea, techo rociado, techo de asfalto modificado, techos verdes, PVC, EPDM, TPO, tejas de asfalto, techos metálicos corrugados y de costura vertical.
  • Cubrejuntas: proporcionados por el contratista de techos o fabricado en sitio e instalados según procedimientos estandarizados para tubos con diámetro externo de 3” o 4.5”. También esta disponible una membrana de EPDM de 35 años para techos metálicos, suministrada de fábrica.
  • Configuraciones para protección contra caídas:
    • Anclas independientes para protección contra caídas/amarre
    • Sistemas de paso de cable en perímetro de techos
    • Sistemas de paso de cable en el centro de techos
    • Anclajes instalados sobre el perímetro de los techos para amarre en el lavado de ventanas
    • Anclaj