Standing Seam Anchor

Standing Seam Anchor No.1207 is available in 3 lightweight aluminum base plate sizes to fit panel seam widths of 8-1/2”up to 26-1/2” wide. 3rd party tested to withstand a 5,000lb force in the specified load direction. Use with SAS No.1208 seam clamp or No.8511 RCT seam clamps for a wide range of standing seam profiles.

No.1207 Specifications:

Min. tensile strength 5,000lb*
3/8”grd. 5052 aluminum w/stamped date of mfg.
Fits a wide range of metal panel profiles
*Request Intertek Standing Seam Report

User Specifications:

Single person 310lb
HLL 2 person fall arrest
HLL 3 person fall restraint

Compliance

ANSI Z359.1-07/OSHA 1926.502

Compliance

Snap-Lock seams
On-site formed seams
Min. seam height 3/4”

Standing Seam Anchor – Complete Kits

Part #: ▲ 1207C-12×18
Fits Panel/Inches: 12″ – 18″
Seam Clamp: 2pc No. 1208*
PPE Anchor: No. 1028* Swivel-D
Wt/lb: 23lbs
UPC: 786158120752

Part #: ▲ 1207C-14×22
Fits Panel/Inches: 14″ – 22″
Seam Clamp: 2pc No. 1208*
PPE Anchor: No. 1028* Swivel-D
Wt/lb: 24lbs
UPC: 786158120769

Part #: ▲ 1207C-18×24
Fits Panel/Inches: 18″ – 24″
Seam Clamp: 2pc No. 1208*
PPE Anchor: No. 1028* Swivel-D
Wt/lb: 26lbs
UPC: 786158120776