| Device |
Permanent commercial flat/low slope roof anchor for window washing suspension |
| Riser Height |
8″/12″/18″/24″/30″/36″ and Custom Heights |
| Fall Protection Rating |
Fall Arrest and Fall Restraint, 1 person |
| Anchor Service Radius |
360-degrees |
| Structure Attachment |
See Instruction Manual for Minimums |
| Fastener Options |
See Instruction Manual for Minimums |
| Minimum Deformation |
5,000 pounds |
| Minimum Tensile |
5,000 pounds |
| Ultimate Capacity |
7.500 pounds |
| Proof Loading |
2,500 pounds maximum for part numbers with “W” suffix |
| 4-to-1 Design Load |
1,250 pounds |
| Material Domestic |
A-36 Steel, 304 Stainless Steel, 316 Stainless Steel |
| Material Imported |
Q235 Steel |
| Finish |
ASTM 123 or Hot Dip Galvanized (HDG) |
| Temperature Rating |
-30 degrees Fahrenheit up to 130 degrees Fahrenheit |
| Maximum User Weight |
340 pounds including tools and equipment |
| 3rd Certification |
Dynamark & D.H. Glabe |
| OSHA Standard |
1926:502 and 1910.140913) |
| ANSI Standard |
Z359.1-07 and A10.32-2012 |
| IWCA Standard |
1-14.1 Window Washing |
| Cal-OSHA Standard |
Title 8, section 3291 Roof Tie Backs where applicable |
