CRA Rigging Hardware Pass-Thru Top Converter
SAS’s Pass-Thru Converter is a device that converts Pass-Thru Top CRA’s into a Loop Top to connect your PPE for a fall arrest rating. Heavy steel construction with Galvanized coating. Designed specifically for use with SAS commercial anchors, these components can be used with other mfg. equipment when engineered by a qualified person.
We also offer numerous parts to achieve a HLL system that works for your products including:
- Rigging Kits: our standard turnbuckle/clamps/thimbles/sliders/energy absorber for lifeline lengths up to 120’. They include everything you need for a complete installation except for the cable. Available in galvanized or stainless-steel finishes. See part numbers 1050-G and 1051-S.
- Energy Absorber: a specialized in-line energy absorber
- Turnbuckles: used in the horizontal lifeline system to adjust wire rope length and tension. Available in galvanized or stainless-steel finishes. Use 1 turnbuckle in systems up to 60’ and 2 turnbuckles in systems 60’ – 120’.
- Cable: galvanized 3/8” cable rated for 14,000 pounds. Stainless Steel rated for 12’000 pounds. Use in runs up to 120’ and in conjunction with the rigging kits.
- Cable Clamps: used to terminate the end of the cable lifelines and available in galvanized and stainless-steel finishes.
- Cable Thimble: used to terminate the end of our cable systems and are required on both ends of the HLL. Available in galvanized or stainless-steel finishes.
- SAS Coupler Adapter: used to link turnbuckles, energy absorbers and CRA together
- Connector “O” Rings: permanently attached to the HLL and used to connect your personal protective equipment to slide through pass-thru top CRA’s.
- Pass-Thru Converter: a device that converts Pass-Thru Top CRA’s into a Loop Top to connect your PPE to for a fall arrest rating
- Label Packages: comprehensive warning, instruction and inspection label packages for all rigging equipment and hardware
Please refer to all applicable Instruction/Specification Manuals for further detailed information on rigging, attachment and use.
| Image | Part # | Description | UPC |
|---|---|---|---|
|
|
▲ 1054 | PTT/CRA Pass-Thru Converter with Detent Pin | 786158105407 |
| CRA HLL Rigging Components | |||
|
|
1055 | 3/8″ Galvanized Cable sold per ft. Cut to Length | 786158105506 |
| 1055-S | 3/8″ Stainless Steel Cable sold per ft. Cut to Length | 786158105575 | |
|
|
1065-AS | Spring Energy Absorber – 304 Stainless Steel | 786158106527 |
|
|
1065-AC | Coil Energy Absorber – 304sst option only | 786158106510 |
|
|
1052-G | Factory Supplied HLL Swage – Galvanized. Includes: 1ea eye thimble, 2 Aluminum Swages & PVC cover | 786158105216 |
| 1052-S | Factory Supplied HLL Swage – Stainless Steel. Includes: 1ea eye thimble, 2 Aluminum Swages & PVC cover | 786158105223 | |
|
|
5010-SM | HLL Connector O-Ring (4ea required for the complete HLL kit, #1051-S) | 786158501018 |
|
|
1058 | 3/4″ x 12″ Turnbuckle – Galvanized w/2ea 5/8″ x 3″ 18-8 SST Bolts and Lock Nuts (2ea required for the complete HLL kit, #1050-G) | 786158105803 |
|
|
1058-S | 3/4″ x 6″ Turnbuckle – Stainless Steel w/2ea 5/8″ x 3″ 18-8 SST Bolts and Lock Nuts (2ea required for the complete HLL kit, #1051-S) | 786158105810 |
|
|
1081-S | Loop Top Coupler – 304sst option only. Comes w/1ea 5/8″ x 2.0″ & 1ea 5/8″ x 2-1/4″ Bolts and Lock Nuts. Compatible w/#1090 Loop Tops or 4-Way Top Fixures | 786158108101 |
|
|
1087-SA | HLL Absorber Coupler – 304sst option only. Comes w/2ea 3/8″ x 1″ & 1ea 5/8″ x 2″ Bolts and Lock Nuts (2ea required for the complete HLL kit, #1051-S) | 786158108620 |
|
|
1057 | 3/8″ Galvanized Rope Eye Thimble (2ea required for the complete HLL kit, #1050-G) | 786158105704 |
| 1057-ST | 3/8″ Stainless Steel Rope Eye Thimble (2ea required for the complete HLL kit, #1051-S) | 786158105711 | |
|
|
1056 | 3/8″Cable Clamp (6ea required for the complete HLL kit, #1050-G) | 786158105605 |
|
|
1056-S | 3/8″ Stainless Steel Cable Clamps (6ea required for the complete HLL kit, #1051-S) | 786158105629 |
| ▲ = Limited Stock | |||
Part # – 1054 (Limited Stock)
Description:
PTT/CRA Pass-Thru Converter with Detent Pin
UPC:
786158105407
CRA HLL Rigging Components
Part # – 1055
Description:
3/8″ Galvanized Cable sold per ft. Cut to Length
UPC:
786158105506
Part # – 1055-S
Description:
3/8″ Stainless Steel Cable sold per ft. Cut to Length
UPC:
786158105575
Part # – 1065-AS
Description:
Spring Energy Absorber – 304 Stainless Steel
UPC:
786158106527
Part # – 1065-AC
Description:
Coil Energy Absorber – 304sst option only
UPC:
786158106510
Part # – 1052-G
Description:
Factory Supplied HLL Swage – Galvanized. Includes: 1ea eye thimble, 2 Aluminum Swages & PVC cover
UPC:
786158105216
Part # – 1052-S
Description:
Factory Supplied HLL Swage – Stainless Steel. Includes: 1ea eye thimble, 2 Aluminum Swages & PVC cover
UPC:
786158105223
Part # – 5010-SM
Description:
HLL Connector O-Ring (4ea required for the complete HLL kit, #1051-S)
UPC:
786158501018
Part # – 1058
Description:
3/4″ x 12″ Turnbuckle – Galvanized w/2ea 5/8″ x 3″ 18-8 SST Bolts and Lock Nuts (2ea required for the complete HLL kit, #1050-G)
UPC:
786158105803
Part # – 1058-S
Description:
3/4″ x 6″ Turnbuckle – Stainless Steel w/2ea 5/8″ x 3″ 18-8 SST Bolts and Lock Nuts (2ea required for the complete HLL kit, #1051-S)
UPC:
786158105810
Part # – 1081-S
Description:
Loop Top Coupler – 304sst option only. Comes w/1ea 5/8″ x 2.0″ & 1ea 5/8″ x 2-1/4″ Bolts and Lock Nuts. Compatible w/#1090 Loop Tops or 4-Way Top Fixtures
UPC:
786158108101
Part # – 1087-SA
Description:
HLL Absorber Coupler – 304sst option only. Comes w/2ea 3/8″ x 1″ & 1ea 5/8″ x 2″ Bolts and Lock Nuts (2ea required for the complete HLL kit, #1051-S)
UPC:
786158108620
Part # – 1057
Description:
3/8″ Galvanized Rope Eye Thimble (2ea required for the complete HLL kit, #1050-G)
UPC:
786158105704
Part # – 1057-ST
Description:
3/8″ Stainless Steel Rope Eye Thimble (2ea required for the complete HLL kit, #1051-S)
UPC:
786158105711
Part # – 1056
Description:
3/8″Cable Clamp (6ea required for the complete HLL kit, #1050-G)
UPC:
786158105605
Part # – 1056-S
Description:
3/8″ Stainless Steel Cable Clamps (6ea required for the complete HLL kit, #1051-S)
UPC:
786158105629