D-ShakL2 Anchor – Specs
Technical Specifications | |
---|---|
Device | Permanent or Temporary Anchor for Fall Arrest, Work Positioning, HLL Install |
Anchor Height | 3/4″ |
Fall Protection Rating | Fall Arrest, 1 person, 2 person fall arrest with HLL or 3 person fall restraint with HLL |
Anchor Service Radius | 360-degrees |
Shackle Hole Size | 2 holes at 9/16″ for 1/2″ hardware |
Shackle | 3/16″ x 4-1/2″ x 2.0 |
D-Ring | SAS #5003 HDG |
Structure Attachment | See Instruction Manual for Minimums |
Minimum Breaking | 5,000 pounds |
Minimum Tensile | 5,000 pounds |
Ultimate Strength | 5,000 pounds minimum in any direction of applied load |
4-to-1 Design Load | 1,250 pounds |
Material Imported | Q235 Steel |
Finish | ASTM 123 or Hot Dip Galvanized (HDG) |
Maximum User Weight | 310 pounds including tools and equipment |
OSHA Standard | 1926:502 and 1910.140913 |
ANSI Standard | Z359.1-07 and A10.32-2012 |
Technical Specifications
Device
Permanent or Temporary Anchor for Fall Arrest, Work Positioning, HLL Install
Anchor Height
3/4″
Fall Protection Rating
Fall Arrest, 1 person, 2 person fall arrest with HLL or 3 person fall restraint with HLL
Anchor Service Radius
360-degrees
Shackle Hole Size
2 holes at 9/16″ for 1/2″ hardware
Shackle
3/16″ x 4-1/2″ x 2.0
D-Ring
SAS #5003 HDG
Structure Attachment
See Instruction Manual for Minimums
Minimum Breaking
5,000 pounds
Minimum Tensile
5,000 pounds
Ultimate Strength
5,000 pounds minimum in any direction of applied load
4-to-1 Design Load
1,250 pounds
Material Imported
Q235 Steel
Finish
ASTM 123 or Hot Dip Galvanized (HDG)
Maximum User Weight
310 pounds including tools and equipment
OSHA Standard
1926:502 and 1910.140913
ANSI Standard
Z359.1-07 and A10.32-2012