D-Minus Retro-Flash System
Most roof anchor installations require the removal of shingles to install. This can pose a problem, especially on older roofs with brittle shingles. Well, no more tearing off your ridge cap to install fall arrest anchors because this flashing allows you to install anchors directly over your existing roofing material.
The D-Minus anchor can be mounted directly over existing asphalt shingle roofs without removing any shingles. To cover the anchor and fasteners and protect it from the elements we invented the RetroFlash. It is a special metal flashing made from 20-gauge metal that slips under the course of roofing just above the anchor. It is held in place by the roofing material and caulking used during installation. This product can be painted to match the color of the roofing material, too.
- Top-Chord Installation: Simply center the anchor over the truss and nail or screw the anchor down securely.
- Backer-Board Installation. Install our ¾” backer board under the current roof sheeting and you do not need install into a truss – just install the anchor with the screws and you have a fall arrest anchor point!
- Install the RetroFlashing over your new anchor and install under the headlap of the existing roofing material.
The Instruction/Specification Manual is very comprehensive and has all of the information needed to install the anchor and flashing system.
Features and Benefits:
|
Permanent Fastener Installation List:
Temporary Fastener Installation List:
Temporary Anchor:
|
Features and Benefits:
- Installs under Vented & Non-Vented Ridge Caps
- Perfect for Asphalt, Wood & Metal Roofs
- Includes a Butyl Strip for a Waterproof Seal
- Low Profile Design Blends Into Roofing
- Complies with all OSHA and ANSI Standards
- Includes Stainless Steel Fasteners
Permanent Fastener Installation List:
- Spiral Shank Stainless Steel Nails
- Bugle Head Stainless Steel Screws
- Click the product above to learn more
Temporary Fastener Installation List:
- Duplex Nails
- Click the product above to learn more
Temporary Anchor:
- D-Minus Anchor Temporary Application
- Click the product above to learn more
Image | Part # | Description | UPC | |
---|---|---|---|---|
2404 | Retro-Flash Kit with D-Minus Anchor, butyl flashing, backer board and 3-1/4″ 12d spiral shank 304 stainless steel nails. | 786158240405 | ||
Replacement Parts | ||||
2401 | Retro-Flash System single package. | 786158240108 | ||
2401-A | Retro-Flash system 10 pack. | 786158240115 | ||
2401-B | Retro-Flash System 80 pack box (8 boxes of 10). | 786158240122 | ||
2402 | Retro-Flash System – single package with backer board and fasteners. | 786158240207 | ||
2043-5 | Butyl Flashing Strip – 5”x1-1/4”x1/16”- Bulk Packaged – 10 Count | 786158204384 | ||
2043-7 | Butyl Flashing Strip – 7”x1-1/4”x1/16” – Bulk Packaged – 10 Count | 786158204391 | ||
2043-X | Butyl Flashing Strip – 7”x1-1/4”x1/16” – Bulk Packaged – 80 Count | 786158204315 |