The 30-degree angle fixed length, factory engineered Horizontal Lifeline System is for use by 3 workers in fall restraint or 2 in fall arrest. This system is available in a 20’ kit with or without a carry bag. This 3rd party engineered horizontal line kit is a cost-effective way to have multiple workers on the roof with room to move freely.

Engineering standards specify that a horizontal lifeline without an energy absorbing device subjected to fall hazards must have a 30-degree anchors between anchorage points. Super Anchor Safety fixed length horizontal lifelines, when used with our specified anchorage devices provide an engineered system for rafter spacing of 10’ up to 20’. For accurate rigging, each fixed length horizontal lifeline is labeled for the correct rafter spacing.

  • 3rd Party Engineered 30-degree Angle HLL System
  • Extremely Cost Effective with Replaceable Parts
  • Temporary Installation on Flat or Pitched Surfaces
  • 2 person Fall Arrest or 3 person Fall Restraint
  • Factory Engineered 10’, 16’ and 20’ Replacement Lifelines Available
  • Heavy Duty Cargo Bag Available
  • Reusable WS Series Screws Provided
  • Super Heavy Duty 3/8” Galvanized Cable rated for 14,000+ pounds
  • 4-page Instruction/Specification Manual Included
Image Part # Nominal Length Finished Length Description UPC

Download JPG

1323 20′ 23′ 20′ 30° Horizonal Lifeline Kit – Carry Bag, Hinge2™ Anchors, HLL Wire Rope w/Snaphooks, O-Ring Sliders & Fasteners 786158132304

Download JPG

1324 20′ 23′ 20′ 30° Horizontal Lifeline Kit – Hinge2™ Anchors, HLL Wire Rope, Connectors, Fasteners, Sliders 786158132403

Download JPG

1335-10 10′ 11′-6″ 10′ 30-degree cable with snaphooks 786158133509
1335-12 12 13′-6″ 12′ 30-degree cable with snaphooks 786159133516
1335-14 14′ 16′ 14′ 30-degree cable with snaphooks 786158133523
1335-16 16′ 18′-4″ 16′ 30-degree cable with snaphooks 786158133530
1335-18 18′ 20′-6″ 18′ 30-degree cable with snaphooks 786158133547
1335-20 20′ 23′ 20′ 30-degree cable with snaphooks 786158133554

Download JPG

3013-D Hinge-2 Reusable Adjustable Roof Anchor, 11 Gauge Dacromet Coated Steel with 36ea 3″ Duplex Nails 16d Zinc Coated for 7/32″ Fastener Holes. Dual Fastener Holes 7/32″ and 5/16″ for Installation Fastener Options. Retail Packaging. 786158301304

Download JPG

2084-2.5 2-1/2″ WS Series Screw, Box of 25 retail packed 786158208436

Download JPG

2012-A Duplex Nails, Zinc Coated Package of 36 786158201215

    Request more Information about the Hinge2 Anchor - Horizontal Lifeline: