CRZ Anchor Wood Beam

An exclusive Super Anchor Safety design for installing onto wood beams used in the construction industry. The CRA saddle mount can be installed over wood beams up to 4” in diameter. Smaller beams can be built up using additional material to match the 4.0” anchor leg I.D. The bolt through attachment provides a very strong connection point allowing the CRZ to be used for single person PPE, Horizontal Lifeline System (HLL) and Window Washing suspension. The engineered loop top design is extremely strong and accepts all industry standard snaphooks and carabiners. The anchor comes with 3/8” x 5 bolts. The CRZ anchors come in 5 different configurations:

  • 6” Riser Height with Cast Loop Top Parallel with the Z-Purlin
  • 6” Riser Height with Pass-Thru Loop Top parallel with the Z-Purlin
  • 6” Riser Height with Cast Loop Top Perpendicular to the Z-Purlin
  • 6” Riser height with Pass-Thru Loop Top Perpendicular to the Z-Purlin
  • Custom Size CRZ with your choice of Loop Top, Riser Height and Saddle Width

CRZ’s are offered as stand-alone anchors or as a complete kit with a 35-year rated EPDM flashing base. Complete kits come with the anchor, flashing, bolt kit, wood blocking, pipe clamp and screws.

The CRZ Roof Anchors with pass-thru tops allow the user to slide through the top of the anchor while remaining connected to the 3/8” horizontal cable lifeline. This feature provides a 100% tie-off along the entire length of the HLL system. Pass-Thru tops are oriented for the direction of the HLL using models AP or BP (below) and require the CRZ A or B models to be used as the HLL End Anchors. NOTE: Pass-Thru tops are not specified for personal fall protection anchors. They can only be used in conjunction with a cable HLL.

  • CRZ End-Anchor available in Hot Dip Galvanized, 304 SST or 316 SST
  • CRZ Pass-Thru Anchors available in Hot Dip Galvanized, 304 SST or 316 SST
  • Rated for Fall Arrest or use in a HLL System up to 120’
  • 35-year EPDM Flashing for Metal Roofs Available
  • 3.0” Riser Heights with 0.203” Wall Thickness
  • Includes all Mounting Hardware
  • 5,000 Pound Minimum Strength
  • Complies with OSHA 1926:502 and ANSI-Z359.1-07
  • Meets ICWA 1-14.1 Window Washing Standards
  • 2,500 Maximum Proof Loading

Window Washing Suspension: Roof and Wall Safety/Tie-Back Anchors for window washing suspension require special consideration. North America safety standards require a building to have certified anchorages capable of supporting the necessary loads before any worker suspends from the anchor. Our anchors can help you provide compliance with OSHA, ANSI and IWCA I-14.1 standards for window cleaning or any other job requiring suspension over the edge of the building.

Fall protection anchors and window washing anchors for rope descent systems have different criteria regarding their certification and design loading. Following is an overview of the differences:

  • Fall Protection Anchors:
    • “Anchorages used for attachment of personal fall arrest equipment shall be…capable of supporting at least 5,000 pounds per employee attached, or shall be designed, installed and used as follows: (i) as part of a complete personal fall arrest system which maintains a safety factor of at least two: and (ii) under the supervision of a qualified person” – OSHA 1926.502(d)(15)
  • Window Washing Anchors:
    • “Anchorages shall be capable of sustaining a 5,000-pound minimum load or a minimum 4-to-1 factor of safety, whichever is greater, in any direction the load is applied” – IWCA I-14.1 (9.1.1)
    • “For post-installation testing…an anchorage with an ultimate capacity of 5,000 pounds shall be tested at 2,500 pounds” – IWCA I-14.1 (8.1.3(b))
    • “Certification and re-certification of anchorages shall be under the supervision of a registered professional engineer” – IWCA I-14.1 (9.1.10)

Regulatory Requirements set forth for Window Washing anchors:

  • Working Load of Anchorage: 1,250 pounds IWCA I-14.1 (8.1.3(b) and (9.1.1)
  • Allowable Proof Load of Anchors: 2,500 pounds IWCA I-14.1 (8.1.3(b) and (9.1.1)
  • Ultimate Load with Certification: 5,000 pounds IWCA I-14.1 (9.1.1)
  • Inspection by Authorized Person: Before each use
  • Inspection by Competent Person: Before each use
  • Inspection by Qualified person: Annually

NOTE: The State of California has unique requirements for window washing anchors. Please see out “Cal-OSHA” Series of CRA’s.

Window Washing suspension requires 2 anchors for the worker to tie off to – one anchor supports the workers equipment and one anchor is used for the safety lifeline or fall arrest equipment. Our pre-engineered anchors give you the compliance that you need at an affordable cost and can be mounted to roof decking, concrete curbs/beams/walls, steel beams as well as other structures capable of supporting the intended loads. The CRA’s for window washing are designed for a 5,000-pound ultimate load, a 2,500-pound test load and a 1,250-pound allowable load. Parapet walls must be capable of supporting the intended loads, too. Super Anchor Safety can help with the proper placement and layout of the anchors to ensure proper coverage for window washing suspension.

ImagePart #OrientationMaterialDescriptionUPC

Download

1126-AParallelHDG Steel6″ Riser, Loop Top, Anchor Only. PPE Anchor, HLL End, Intermediate Anchors, Window Washing Anchor786158112603
1126-ASParallel304 SST6″ Riser, Loop Top, Anchor Only. PPE Anchor, HLL End, Intermediate Anchors, Window Washing Anchor786158112610
1126-ASXParallel316 SST6″ Riser, Loop Top, Anchor Only. PPE Anchor, HLL End, Intermediate Anchors, Window Washing Anchor786158112627

Download

1126-APParallelHDG Steel6″ Riser, Pass-Thru, Anchor Only. Horizontal Lifeline Intermediate Anchors786158112634
1126-APSParallel304 SST6″ Riser, Pass-Thru, Anchor Only. Horizontal Lifeline Intermediate Anchors786158112641
1126-APSXParallel316 SST6″ Riser, Pass-Thru, Anchor Only. Horizontal Lifeline Intermediate Anchors786158112658

Download

1126-B90-degreeHDG Steel6″ Riser, Loop Top, Anchor Only. PPE Anchor, HLL End, Intermediate Anchors, Window Washing Anchor786158112665
1126-BS90-degree304 SST6″ Riser, Loop Top, Anchor Only. PPE Anchor, HLL End, Intermediate Anchors, Window Washing Anchor786158112672
1126-BSX90-degree316 SST6″ Riser, Loop Top, Anchor Only. PPE Anchor, HLL End, Intermediate Anchors, Window Washing Anchor786158112689

Download

1026-BP90-degreeHDG Steel6″ Riser, Pass-Thru, Anchor Only. Horizontal Lifeline Intermediate Anchors786158112696
1126-BPS90-degree304 SST6″ Riser, Pass-Thru, Anchor Only. Horizontal Lifeline Intermediate Anchors786158112616
1126-BPSX90-degree316 SST6″ Riser, Pass-Thru, Anchor Only. Horizontal Lifeline Intermediate Anchors786158112609

Download

2048CRZ 3/8″ SST Replacement Bolt Pack, 2pc 5″ SST w/Lock Nuts, 2pc 1-1/4″ WS Screws786158204803

Download

2049CRZ Z-Purlin Wood Block, 2pc 1-1/4″ WS Screws786158204902

Download

2050CRZ Master Flash 10″x10″, 1pc 3″ SST Pipe Clamp, 12pc SD Tec Screws786158205008
Anclas para techo tipo CRZ para Vigas de Madera:

Un diseño exclusivo de Super Anchor Safety para instalaciones en vigas de madera empleadas en la industria de la construcción. La base de la montura del ancla CRZ, puede ser instalada sobre vigas de madera con diámetro de hasta 4”. Para vigas pequeñas, estas pueden ser acuñadas con material adicional hasta que coincida con el diámetro interno de 4” del ancla. El perno pasante para sujeción provee un punto de conexión fuerte que permite ser usado por un solo usuario como equipo de protección personal, sistemas horizontales de cuerdas salvavidas de protección contra caídas, lavado de ventanas por suspensión. El diseño del ojal de la tapa superior es supremamente fuerte y permite la conexión de cualquiera de los ganchos de seguridad y mosquetones regulares de la industria. Las anclas se suministran con pernos de 5/8”x 5” y estas vienen en 5 diferentes configuraciones:

  • Tubo de 6” con el ojal forjado en paralelo a la viga Z-Purlin
  • Tubo de 6” con ojal pasante en paralelo a la viga Z-Purlin.
  • Tubo de 6” con el ojal forjado perpendicular a la viga Z-Purlin
  • Tubo de 6” con ojal pasante perpendicular a la viga Z-Purlin.
  • Las anclas CRZ pueden ser fabricadas según las especificaciones del cliente, donde este puede elegir el tipo de ojal, altura del tubo y ancho de la montura del ancla.

Las anclas CRZ son ofrecidas individualmente o como parte de un equipo completo con membrana cubre juntas hecha en EPDM de 35 años. Los equipos completos suministrados incluyen las anclas, la membrana cubre juntas, juego de pernos, bloque de madera, abrazaderas para tubo y tornillos.

Las anclas CRZ equipadas con la tapa de ojal pasante, permite que el usuario deslice su cuerda a través de la tapa del ancla permaneciendo conectado al cable horizontal salvavidas de 3/8”. Esta característica proporciona un amarre del 100% a lo largo de todo el cable del sistema de cuerda salvavidas horizontal. Las anclas con tapas pasa cables se deben orientar en la dirección del cable, para ese fin de deben emplear las anclas tipo